90 Cubic Inches Per Minute in Titanium
Mag says its XTi super profiler is designed to remove metal at impressive rates. Its first two machines are are being used for aerospace applications.
Share
Chip Storie, Mag executive vice president, says the XTi is engineered and built for maximum dynamic stiffness and sustained power in titanium roughing. The profiler uses five spindle motors rated 51 kW, producing 2523 N-m of torque. The spindle support structure is incorporated into a heavyweight gantry designed for superior damping. “ADI's goal was to set a new standard for producing titanium parts at the lowest cost per piece,” he says.
ADI president and CEO John Cave says the company typically roughs titanium 6-4 at radial depth of 0.38 inch and axial depth of 1.5 to 2.5 inches. The company had Mag mill an angular channel in titanium with 4.0-inch axial depth and a 1.5-inch radial depth. Impressed with the ease of these cuts, he says, “The machine peeled off perfect '6-shaped' chips with no chatter or sign of structural instability.”
Related Content
-
Where Micro-Laser Machining Is the Focus
A company that was once a consulting firm has become a successful micro-laser machine shop producing complex parts and features that most traditional CNC shops cannot machine.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
